Emergency Lights and Exit Lights are battery-backed lighting devices that come on automatically when a building experiences a power outage. These are standard in new commercial and high occupancy residential buildings.

APS FireCo Technicians while on site performing Fire Extinguisher or Kitchen Suppression System inspections can inspect, test, repair, and replace Emergency Lights and Exit lights.

Emergency and Exit lighting are required to be tested annually to assure the battery is fully charged and will perform as required. All APS FireCo Technicians carry a battery annalizer to prevent from turning off power for the 90-minute test requirement. Technician vehicles are also stocked with the most common batteries and bulbs.

APS FireCo provides the full range of fire alarm detection systems and accessories including all required hardware and system programming to provide a complete and operational system, capable of providing the protected premises with the specified functions and operations.

The fire detection and fire alarm system may be a simple conventional or multi-processor based network system designed specifically for fire or audio evacuation applications. Advanced technologies such as video fire detection from Fike SignaFire and linear heat detection from Protectowire are available for more complex applications.  Design and installation shall incorporate UL listed equipment and meet NFPA, OSHA and local codes and standards.

Applications of Fire Detection and Fire Alarm:

• Office Buildings
• Municipal Buildings
• Nursing Homes
• Apartment Buildings
• Warehouses 
• Strip Malls
• Department Stores
• Schools & Universities
• High Rise Buildings
• Large Convention Centers
• Health Care Facilities
• Airports Hotels

APS FireCo can handle all of your fire sprinkler needs, including:

Industrial and Commercial Fire Sprinkler Systems

Fire sprinkler systems designed according to city, state and national codes for use in commercial facilities. Cost is determined by size and use of facility.

Type of fire sprinkler systems include: wet pipe, dry pipe, pre-action, deluge, foam, water mist, and water spray.  We use products from major suppliers such as Chemguard for foam and Marrioff for water mist.

Underground Fire Lines

The piping that connects the fire sprinkler system to its water supply. Cost is determined by length of line, pipe sizing and meter size.

Design

A fire sprinkler system must be designed and fabricated prior to installation. We design using AutoCAD based computer software. If a CAD drawing of the reflected ceiling plan is available, we prefer to work from it rather than recreating the entire drawing. Design is most usually included in the cost of the system.

Inspections

According to the national codes, fire sprinkler systems shall be visually inspected on an annual basis. Fire sprinkler Inspections do not require water to flow through the heads. An inspector takes this opportunity to locate any obstructions such as items stored too close to a riser, or stacked too close to a fire sprinkler head. Other items of which he / she will be aware are newly constructed areas. If a fire sprinkler professional is not consulted during a remodel project, coverage can be jeopardized.

Back Flow Devices

APS Fire has ABPA certified employees qualified to inspect, test and repair back flow devices. Some insurance companies and city governments require annual inspections and testing.

Service

Remodeling? If so, please feel free to call on us to be sure that fire sprinkler coverage is not put at risk. Moving walls, lowering ceilings and adding lighting can potentially obstruct fire sprinklers.

Emergencies

In the event that an accident occurs, we are ready. Most fire sprinkler systems go decades without problems. But occasionally, an old system will develop a leak or a forklift driver will hit a head and knock it loose. In these cases, we are ready to solve the problem. We make every attempt to answer your call with a live person (not an answering service). Occasionally when all of the lines are tied up, it will go to voice mail. The message gives you several alternative numbers to reach us. We pride ourselves on being available, 24 hours a day, 7 days a week and 365 days a year.

APS FireCo is a leader in implementing wet chemical fire suppression systems for kitchens.

We often use the Ansul R-102 Restaurant Fire Suppression System, which is an automatic, pre- engineered, fire suppression system designed to protect the following areas associated with cooking equipment; ventilating equipment including kitchen hoods, ducts, plenums, and filters; fryers; griddles and range tops; upright, natural charcoal, or chain-type broilers; electric, lava rock, mesquite or gas-radiant char-broilers and woks. The system is UL Listed under UL standard 300.

This restaurant fire suppression system is a pre-engineered, wet chemical, cartridge- operated, regulated pressure type with a fixed nozzle agent distribution network. It is listed with Underwriters Laboratories, Inc. (UL). 

The system is capable of automatic detection and actuation and/or remote manual actuation. Additional equipment is available for mechanical or electrical gas line shut-off applications.  The detection portion of the fire suppression system allows for automatic detection by means of specific alloy rated fusible links, which, when the temperature exceeds the rating of the link, the link separates, allowing the regulated release to actuate.

The Ansul PIRANHA™ Restaurant Fire Suppression System is also an automatic, pre-engineered, fixed, fire suppression system designed to protect the same type of cooking equipment listed above with the R-102 System. 

The system is a dual-agent, pre-engineered, fixed, automatic fire extinguishing system developed specifically for improved fire protection of commercial restaurant cooking appliances, exhaust hoods and ducts.

When actuated, the system discharges a fixed amount of proprietary wet chemical agent followed by water through the same nozzles. Water is provided by a connection to the potable water supply. Advantages of the dual system over single wet agent systems include: (1) more robust suppression of hostile fires in protected restaurant hazards; (2) greater hazard area protection with less wet agent; (3) faster flame extinguishment and securing of hot fuels such as cooking shortening; (4) overlapping protection of cooking appliances from fixed nozzle spacing, allowing appliances to be interchanged freely without changing nozzles; (5) more rapid cooling of hot fuels and appliances to prevent re-ignition; (6) simplicity of design and installation.

The addition of the water discharge significantly aids in increasing and prolonging the foam blanket generated by the wet chemical agent. The longer retention of the foam blanket allows the hot grease to cool well below the auto-ignition temperature.  The water spray portion of the system is provided by a connection to the potable water supply.

Kitchen Fire Suppression Applications:

• Restaurants
• Hospitals
• Nursing Homes / Assisted Living Centers
• Hotels
• Schools
• Airports
• Kitchens in Commercial / Industrial Facilities 

APS FireCo provides pre-engineered fire protection systems that protect:

• vehicles
• paint spray booths
• gas station vehicle fueling islands/canopies
• open front spray lacquer areas for furniture making
• auto body repair
• industrial fabrication paint shops
• many other applications  

As mobile equipment has grown in size and complexity, so have vehicle fire suppression systems. Engineers and chemists have jointly developed a new generation of fire detection and suppression products that APS Fire can implement.  From small vehicles to large non-road equipment, you’ll find our systems protecting excavators, haul trucks, loaders, drag lines, dozers, drills, scrapers, graders, compactors, slag pot carriers, underground mining equipment, forestry, waste haulers, and agricultural vehicles.

When it comes to painting products or flowing combustible liquids and gases, our Industrial Fire Suppression Systems from Ansul are the fire suppression system of choice.  The Industrial Fire Suppression System has been pre-engineered for industrial hazards like paint spray booths, dip tanks, and flammable liquid storage rooms. Designed for flexibility and economy, the system features mechanical or electrical detection, total flooding or local application methods, two extinguishing agent options, and multiple tank capacities for Class A, B, and C fire hazards in a wide variety of industrial configurations

Please call APS FireCo for your pre-engineered fire suppression needs.