Oklahoma City
Oklahoma City
APS FireCo Oklahoma City provides fire protection systems and services from its location in Oklahoma City. Each locations is a single point of contact that can handle all of your fire protection needs. APS FireCo Oklahoma City installs and maintains fire extinguishers, fire alarms, fire sprinklers, special hazard fire systems and more.
Major customer groups are critical asset owners, industrial facilities, commercial facilities, offshore facilities, architects & engineers, contractors, and property managers.
APS FireCo Oklahoma City and its affiliates have been operating since 1981 and now employ over 180 professionals.
OK #AC62, 352
Get Started
400 Hudiburg Circle, Ste. A
Oklahoma City, OK 73108
405-672-9666
okc@apsfireco.com
Services
APS FireCo has NICET certified designers and Professional Engineers that will layout a fire protection system customized to your needs. We have NICET Level IV designers on staff with decades of experience that are truly the best in the industry.
We design all types of fire protection systems
|
|
Many jurisdictions are recognizing NICET Level IV design as an equivalent to Fire Protection Engineer design. However, if required, we have Fire Protection Engineers that will get your design approved and stamped.
APS FireCo can design your fire protection while helping you to balance your organization's needs with the needs of all stakeholders involved. Let us help reduce the total cost of protecting against fires and provide operational peace of mind for your organization.
APS FireCo can centrally manage and administer all of your fire protection needs. From our location in Tulsa, OK, we dispatch a select group of national partners to complete your required services.
APS FireCo provides fire protection facility management for national accounts. We specialize in servicing companies that need special hazard experts to help solve the most complex fire protection system problems. Our typical customers have hundreds of locations that require 24/7 support, every day of the year. We manage this with on-call NICET certified technologists in the central time zone.
We complement traditional facility managers with our expertise in fire protection. When business outage or disruption due to fire is a concern, you want us managing that risk for you. We have a select network of the top service providers in each area of the country. No more getting average fire protection work across the country. Get the best in each area!
APS FireCo can provide your organization with a clear understanding of the fire hazards that are present in your organization. We analyze your entire operation, or just a portion of it, then provide a report that highlights the existing hazards and a plan for mitigating those hazards.
A hazard analysis is used as the first step in a process used to assess risk. The result of a hazard analysis is the identification of risks. Preliminary risk levels can be provided in the hazard analysis. The validation, more precise prediction and acceptance of risk is determined in the risk assessment. The main goal of both is to provide the best selection of means of controlling or eliminating the risk.
System inspection and testing is one of the most important things you can do to keep your systems safe and operational at all times. Click on the link below to see what inspection services we provide:
It is our intent to have an estimator available to meet with you at the earliest possible opportunity so you can begin your project. Our estimators are highly experienced in the fire protection field and qualified to accurately and completely bid your project.
We can install all fire protection systems including...
- Fire Alarm
- Fire Sprinkler
- Gas Detection
- Enclosures and Skids
- Kitchen
- Pre-Engineered
- Life Safety
Through APS FireCo, you have access to some of the most innovative and progressive products and solutions for fire protection. We seek quality vendors to deliver products that help you protect your people and valuable assets. The teams behind these brands are dedicated to continual advancement and innovation, ensuring the products they have available to fire protection companies are of the highest possible quality.
We sell materials from major fire protection suppliers including:
|
Type of products available include:
- Clean Agent System Parts
- Fire Alarm Parts & Accessories
- Sprinkler Accessories & Standpipe Equipment
- Fire Extinguisher Parts
- Restaurant System Parts
- and much more!
Contact us for a quote
Use the Request Service Tab in the top left hand corner or call 1-800-685-9666 for a quote.
APSintellinet is a long-range private mesh radio network that is designed for alarm communication to protect people and property.
Customers typically save over $2,000 in the first three years AND get quicker response times!*
- Eliminate the high costs and hassles of your existing phone lines.
- No monthly cellular service costs.
- Fast signal transmission.
- Signals typically take between 1-3 seconds to communicate to the central station compared to the traditional methods of monitoring that can take up to 2 minutes. This matters when a fire can double in size every 30 seconds.
- NFPA compliant and UL864.
- Listed for commercial applications.
- Works with most alarm panels.
Repair Available 24/7
Our repair capabilities are available 24 hours a day for everyday of the year. We have the capability to be at your location anywhere in the world. Technicians can be on site quickly for emergencies in Dallas, Fort Worth, Houston, Oklahoma City, and Tulsa, plus surrounding areas.
We can repair or modify all fire protection systems including those in the linked document below...
It is imperative that your company and employees know how to operate the installed fire protection system, and are prepared in the event of a fire to evacuate safely. We often provide training along with inspection or service contracts. APS FireCo can provide training directly to your group, at your location. Depending on clients needs
APS FireCo can provide both simulated and live fire training. Keep in mind that the Occupational Safety and Health Administration requires training.
OSHA standards that require such plans and training include the following:
- Process Safety Management of Highly Hazardous Chemicals, 1910.119
- Include housekeeping procedures for storage and cleanup of flammable materials and flammable waste.
- Address handling, packaging, and recycling of flammable waste.
- Cover procedures for controlling workplace ignition sources such as smoking, welding, and burning.
- Provide for proper cleaning and maintenance of heat producing equipment such as burners, heat exchangers, boilers, ovens, stoves, and fryers and require storage of flammables away from this equipment.
- Inform workers of the potential fire hazards of their jobs and plan procedures.
- Require plan review with all new employees and with all employees whenever the plan changes.
Systems & Equipment
APS FireCo is a leading designer and manufacturer for fire protection enclosures, skids, and cabinets for both off-shore and on-shore applications. Our years of experience have allowed us to become innovators in bringing together both fire protection system fabrication and installation. We custom fabricate any sized enclosure or skid from any grade of steel per the environmental site requirements. Inside the unit. we install state-of-the-art fire protection equipment to meet your specific detection and suppression needs.
Based out of our Houston metro location, APS FireCo provides fire protection enclosures and skids for many petroleum companies both off-shore and on-shore. Many other applications call for fully-enclosed and self-contained fire protection units. If your organization needs engineered enclosures or skids, we can build them for you.
Emergency Lights and Exit Lights are battery-backed lighting devices that come on automatically when a building experiences a power outage. These are standard in new commercial and high occupancy residential buildings.
APS FireCo Technicians while on site performing Fire Extinguisher or Kitchen Suppression System inspections can inspect, test, repair, and replace Emergency Lights and Exit lights.
Emergency and Exit lighting are required to be tested annually to assure the battery is fully charged and will perform as required. All APS FireCo Technicians carry a battery annalizer to prevent from turning off power for the 90-minute test requirement. Technician vehicles are also stocked with the most common batteries and bulbs.
Explosion accidents kill hundreds of people and cause billions of dollars in damages each year around the world, but they can be controlled with an explosion suppression system, reducing the likelihood of serious injuries or death, as well as the damage to facilities and equipment.
APS FireCo can help you mitigate the risk of explosions in a wide variety of environments. Our team has a deep knowledge of the processes, current code compliance, and technical specifications necessary to protect your facility, equipment, and personnel.
Explosion detection
Explosion detection devices recognize critical warning signs and make the decision on when to activate explosion isolation and/or explosion suppression systems, which can help to prevent an explosion from damaging your equipment and facility, and injuring or killing personnel.
Explosion suppression
Explosion suppression systems are expertly designed to immediately identify, and then chemically suppress an explosion before it can cause a disaster, helping to reduce damage, injuries, and deaths.
Explosion isolation
Explosion isolation systems work to stop the spread of flame from one location to another through the use of fast‐acting explosion isolation valves and/or chemical barriers. These type of systems are particularly well suited to work in support of explosion venting systems.
Chemical isolation
This method instantly discharges an explosion suppressant agent into the duct work to suppress the flame, preventing it from expanding and reaching other, areas, equipment, or personnel.
Mechanical isolation
This method achieves the same goal by initiating the release of a high speed knife valve, which forms a protective mechanical barrier within the pipeline.
Explosion venting
Explosion venting systems provide over‐pressure protection from dangerous industrial explosion hazards by creating a planned pathway for the expanding gases from an explosion to safely escape. These systems are economical to install, and offer fast, reliable operation in an explosion situation. They are typically used in conjunction with explosion isolation and suppression systems.
APS FireCo provides the full range of fire alarm detection systems and accessories including all required hardware and system programming to provide a complete and operational system, capable of providing the protected premises with the specified functions and operations.
The fire detection and fire alarm system may be a simple conventional or multi-processor based network system designed specifically for fire or audio evacuation applications. Advanced technologies such as video fire detection from Fike SignaFire and linear heat detection from Protectowire are available for more complex applications. Design and installation shall incorporate UL listed equipment and meet NFPA, OSHA and local codes and standards.
Applications of Fire Detection and Fire Alarm:
- Office Buildings
- Municipal Buildings
- Nursing Homes
- Apartment Buildings
- Warehouses
- Strip Malls
- Department Stores
- Schools & Universities
- High Rise Buildings
- Large Convention Centers
- Health Care Facilities
- Airports Hotels
APS Fire can do the following...
- Fire Hose Inspection and Testing
- Recharge of Fire Extinguishers
- Fire Extinguisher Inspection, Testing & Training
- Recharge of Systems
- DOT Hydrotesting
Used properly, a portable fire extinguisher can save lives and property by putting out a small fire or controlling it until the fire department arrives.
APS FireCo can provide you with both hand portable and wheeled fire extinguisher units to meet any application you may have. You should, however, choose your fire extinguisher carefully. A fire extinguisher should bear the seal of an independent testing laboratory. It should also be labeled as to the type of fire it is intended to extinguish. Additionally, the fire extinguishers must be large enough to put out the fire. Most portable fire extinguishers discharge completely in as few as eight seconds.
There are five basic classes of fires. All fire extinguishers are labeled with the classes of fires they can put out. Below are the five classes and the types of fires they control.
| CLASS | TYPES OF FIRES |
|---|---|
| A | ORDINARY COMBUSTIBLES Wood, paper, cloth, rubber, many plastics, etc. |
| B | FLAMMABLE LIQUIDS & GASES Gasoline, oils, paint thinner, dry cleaning agents, propane, natural gas, tar, etc. |
| C | FIRES INVOLVING LIVE ELECTRICAL EQUIPMENT |
| D | COMBUSTIBLE METALS Metal fires involving magnesium, sodium, potassium and sodium-potassium alloys, lithium and lithium alloy |
| K | KITCHEN FIRES Fires in cooking appliances that involve combustible cooking media such as vegetable or animal oils and fat |
APS FireCo can handle all of your fire sprinkler needs, including:
Industrial and Commercial Fire Sprinkler Systems
Fire sprinkler systems designed according to city, state and national codes for use in commercial facilities. Cost is determined by size and use of facility.
Type of fire sprinkler systems include: wet pipe, dry pipe, pre-action, deluge, foam, water mist, and water spray. We use products from major suppliers such as Chemguard for foam and Marrioff for water mist.
Underground Fire Lines
The piping that connects the fire sprinkler system to its water supply. Cost is determined by length of line, pipe sizing and meter size.
Design
A fire sprinkler system must be designed and fabricated prior to installation. We design using AutoCAD based computer software. If a CAD drawing of the reflected ceiling plan is available, we prefer to work from it rather than recreating the entire drawing. Design is most usually included in the cost of the system.
Inspections
According to the national codes, fire sprinkler systems shall be visually inspected on an annual basis. Fire sprinkler Inspections do not require water to flow through the heads. An inspector takes this opportunity to locate any obstructions such as items stored too close to a riser, or stacked too close to a fire sprinkler head. Other items of which he / she will be aware are newly constructed areas. If a fire sprinkler professional is not consulted during a remodel project, coverage can be jeopardized.
Back Flow Devices
APS Fire has ABPA certified employees qualified to inspect, test and repair back flow devices. Some insurance companies and city governments require annual inspections and testing.
Service
Remodeling? If so, please feel free to call on us to be sure that fire sprinkler coverage is not put at risk. Moving walls, lowering ceilings and adding lighting can potentially obstruct fire sprinklers.
Emergencies
In the event that an accident occurs, we are ready. Most fire sprinkler systems go decades without problems. But occasionally, an old system will develop a leak or a forklift driver will hit a head and knock it loose. In these cases, we are ready to solve the problem. We make every attempt to answer your call with a live person (not an answering service). Occasionally when all of the lines are tied up, it will go to voice mail. The message gives you several alternative numbers to reach us. We pride ourselves on being available, 24 hours a day, 7 days a week and 365 days a year.
Flame & Combustible / Toxic Gas Detection
Today's hazardous environments demand the highest reliability that a flame detector can deliver. Optical flame detectors offer true optical integrity combined with the highest false alarm rejection level.
APS FireCo offers a wide range of products to meet your needs for detecting combustible and toxic gases in any application inlcuding offshore oil and gas platforms, petrochemical refineries, and engine test cells. We also offer liquid leak detectors.
APS FireCo provides conventional, addressable and custom combination systems. These comprehensive, approved systems integrate gas hazard, flame detection and fire suppression equipment.
Flame Products
- For applications with high background radiation levels, such as turbine packages or offshore facilities, the multi-spectrum infrared flame detector is the ideal flame detector.
- The single frequency infrared detector is designed for high-pressure hydrocarbon flame detection or where high speed response and contamination resistance is critical.
- The UV/IR flame detector is suited for applications such as aircraft hangars that could have UV radiation sources present.
- Semiconductor fabrication tools and facilities require high false alarm immunity and fast response time, and the dual spectrum infrared flame detector is the perfect choice.
Gas Products
- The IR gas detector delivers the best hydrocarbon gas detection performance on the market! In addition to standard analog, HART, and Modbus communication capabilities, an optional built-in relay package rounds out the feature set.
- Infrared gas detector continues to deliver reliable hydrocarbon gas detection and the lowest cost of ownership in virtually all LEL detection applications.
- Stainless-steel Catalytic Gas Sensors along with combustible gas transmitters provide the industries most reliable catalytic-sensor solution for flammable gas & hydrogen vapor detection applications.
APS FireCo installs the best products including Det-tronics (Detector Electroncs).
APS FireCo is a leader in implementing wet chemical fire suppression systems for kitchens.
We often use the Ansul R-102 Restaurant Fire Suppression System, which is an automatic, pre- engineered, fire suppression system designed to protect the following areas associated with cooking equipment; ventilating equipment including kitchen hoods, ducts, plenums, and filters; fryers; griddles and range tops; upright, natural charcoal, or chain-type broilers; electric, lava rock, mesquite or gas-radiant char-broilers and woks. The system is UL Listed under UL standard 300.
This restaurant fire suppression system is a pre-engineered, wet chemical, cartridge- operated, regulated pressure type with a fixed nozzle agent distribution network. It is listed with Underwriters Laboratories, Inc. (UL).
The system is capable of automatic detection and actuation and/or remote manual actuation. Additional equipment is available for mechanical or electrical gas line shut-off applications. The detection portion of the fire suppression system allows for automatic detection by means of specific alloy rated fusible links, which, when the temperature exceeds the rating of the link, the link separates, allowing the regulated release to actuate.
The Ansul PIRANHA™ Restaurant Fire Suppression System is also an automatic, pre-engineered, fixed, fire suppression system designed to protect the same type of cooking equipment listed above with the R-102 System.
The system is a dual-agent, pre-engineered, fixed, automatic fire extinguishing system developed specifically for improved fire protection of commercial restaurant cooking appliances, exhaust hoods and ducts.
When actuated, the system discharges a fixed amount of proprietary wet chemical agent followed by water through the same nozzles. Water is provided by a connection to the potable water supply. Advantages of the dual system over single wet agent systems include: (1) more robust suppression of hostile fires in protected restaurant hazards; (2) greater hazard area protection with less wet agent; (3) faster flame extinguishment and securing of hot fuels such as cooking shortening; (4) overlapping protection of cooking appliances from fixed nozzle spacing, allowing appliances to be interchanged freely without changing nozzles; (5) more rapid cooling of hot fuels and appliances to prevent re-ignition; (6) simplicity of design and installation.
The addition of the water discharge significantly aids in increasing and prolonging the foam blanket generated by the wet chemical agent. The longer retention of the foam blanket allows the hot grease to cool well below the auto-ignition temperature. The water spray portion of the system is provided by a connection to the potable water supply.
Kitchen Fire Suppression Applications:
- Restaurants
- Hospitals
- Nursing Homes / Assisted Living Centers
- Hotels
- Schools
- Airports
- Kitchens in Commercial / Industrial Facilities
APS FireCo provides a large selection of safety supplies for your organization's needs. We carry the following items, available for immediate purchase:
- Personal Protection & Safety Products
- Emergency Response Products
- Fire Hose, Nozzles, Brass & Hose Valves
- Cabinets, Accessories & Covers
- Signs, Labels & Tags
- and much more!
Contact us for a quote
Please email us at materials@apsfireco.com or call 918-258-0454 for a quote.
APS FireCo provides pre-engineered fire protection systems that protect:
- vehicles
- paint spray booths
- gas station vehicle fueling islands/canopies
- open front spray lacquer areas for furniture making
- auto body repair
- industrial fabrication paint shops
- many other applications
As mobile equipment has grown in size and complexity, so have vehicle fire suppression systems. Engineers and chemists have jointly developed a new generation of fire detection and suppression products that APS Fire can implement. From small vehicles to large non-road equipment, you’ll find our systems protecting excavators, haul trucks, loaders, drag lines, dozers, drills, scrapers, graders, compactors, slag pot carriers, underground mining equipment, forestry, waste haulers, and agricultural vehicles.
When it comes to painting products or flowing combustible liquids and gases, our Industrial Fire Suppression Systems from Ansul are the fire suppression system of choice. The Industrial Fire Suppression System has been pre-engineered for industrial hazards like paint spray booths, dip tanks, and flammable liquid storage rooms. Designed for flexibility and economy, the system features mechanical or electrical detection, total flooding or local application methods, two extinguishing agent options, and multiple tank capacities for Class A, B, and C fire hazards in a wide variety of industrial configurations
Please call APS FireCo for your pre-engineered fire suppression needs.
APS FireCo is a leading provider of special hazard fire protection systems for critical assets. We design and build fire suppression systems for the most complex fire hazard environments. Our fire protection systems currently protect mission critical systems all over the world. From custom designing a turnkey clean agent system integrated with a pre-action dry pipe sprinkler system for a data center to fabricating a fully enclosed system to protect electrical switchgear rooms on an oil platform near Siberia, we have done it.
The first key element in protecting mission critical facilities is rapid detection of fire in its incipient stage. Precision fire alarm and control functions alert people and initiate emergency actions. Then clean, fast-acting fire suppression prevents extensive damage to people, property and business continuity. This total flood application can be designed to be completely life safe.
Common special hazard applications:
- Data Centers
- Anechoic Chambers
- Telecommunications
- Warehouse Freezers
- Power Generation
- Oil and Gas
- Manufacturing
- Historical & Cultural
- Healthcare
- Dust Collection
- Aviation
- Isolated Enclosures using Firetrace
